Help and Support / Internet
Install your Arris DG860/TG862 Gateway
This article provides instructions on how to install your Home Wi-Fi Gateway.
Follow these steps:
Figure 1: Back of Arris DG860/TG862
Connect the gateway. Use the coaxial cable provided by BendBroadband to connect the cable port (D) to your cable outlet.
Connect your computer to the cable modem gateway with an Ethernet cable (C), or via a wireless device using the default settings located on the back of your wireless gateway.
Attach the power adapter cable to the gateway (E) and plug it into an electrical outlet.
After the gateway and power is connected, the gateway will automatically attempt to do the following:
Wait for the LED lights to stop blinking (as noted above this could take up to 15 minutes when the Gateway is first powered on). Then verify the following:
All Steps Complete.